Imitation Tortoise Guitar Pick Guard Sheet Stock

This is the most realistic faux tortoise material we have seen anywhere.

4mm (.157") thickness by 7.9" X 9.75" (Will make several pick guards)

A high quality cellulose acetate that is not brittle and chippy like acrylic. Machined (milled) on each surface and double sided so it conveys its beauty equally from either side and throughout.

Application recommendation is 3M double sided tape: 3M Tape Number 467. This material is unpolished. It requires sanding, then steel wool and then buffing by hand polishing with paste wax or by 1750 RPM wheel buffing with white jewelers rouge. This is exceptional pick guard material - this is not the thin cheap stuff.