Resin-Ivory+S™ S grade Imitation ivory for cue stick inlays. Resin-Ivory™ is the highest quality imitation ivory we have seen, worked or handled - ever. This material comes in two grades - regular and +S grade. Both are of the same high quality but with different grain features.
This page is for the higher S grade material. In the photo you see to the left, the right most piece is regular "R" grade Resin-Ivory™ and the left most piece is Resin-Ivory+S™ S grade.
In slab form the Resin-Ivory™has an attractive grain that has a sweep to it that has a zebra stripe pattern whereas the +S grade has a striped grain that looks like quarter sawn ivory. Both grades are very attractive and both grades have equal strength. The difference is strictly in the appearance. We slab this stock in-house from bar stock because the sheet stock produced by the factory is not attractive. Glues to wood with white glue and to other materials with super glue or epoxy.
We cut the slabs from bar stock so the slabs have a cut surface on both sides. This material is ideal for inlay stock but should not be purchased for knife handles or similar applications where very consistant thickness and a smooth surface is needed.
Scroll to see product.
2 Slabs 1/8" by 2.75" by 6"
If you need this as a single 12" slab then purchase here and then email us thru contact page.
+S Grade Imitation ivory. Click on Photo for info
2 Resin-Ivory+S™ Slabs
Each slab = 3/16" by 2.75" by 6"
If you need this as a single 12" slab then purchase and email us thru contact page.
+S Grade Inlay Material.